-
Software module which allows the traceability of the material required for the quality managenets and the 'real time' reception of the casting used in the different machines. The scanning of these date is made by means of bar-code reader. -
Graphico is a flexible, powerful design system for the development of rods and is easy to use and learn. It has been designed for those who manufacture for civil housing and public works and can be structured in various levels and sublevels: job, plan, group, element, figure, bundle. It can generate the reports necessary for each production department: cutting, profiling, assembly. It also allows printing the job cards and job lists for the different machines, so that you can easily work by element or by position, display the weight delivered and to be delivered, and have various statistics available. -
Internal Spider is a safe clamp with small dimensions which, thanks to its innovative shape allows the hooking of the rewinded coils from the inside. -
Automatic bending robot for the production of shapes with positive bends (“L”, “C” and double “C”), up to Ø 40 mm (#11). Device for the production of "bottlenecks“. - Automatic system for bars feeding and discharging. -
Automatic rebar bending station for bars up to Ø 40 mm. It works automatically and bends any kind of shapes, positive and negative bends included. - Automatic system for bars feeding and discharging - 2 adjustable bending speeds -
Reta 13 is an automatic straightening machine apt to process both hot and cold-drawn steel in coils. They can produce cut-to-size bars from wires of ø 13 mm or double ø 10 mm. It is driven by digital electric servomotors. -
Reta 16 UHS is an automatic straightening machine apt to process both hot and cold-drawn steel in coils. They can produce cut-to-size bars from wires of ø 16 mm or double ø 13 mm. It is equipped withSapiens Technology which makes the straightening system completely automatic. It is driven by digital electric servomotors. Also available HIGH SPEED version machine. -
Multi-rotor straightening and shaping center using coils up to Ø 20mm for the production of straight bars, large stirrups and shapes with bends on both ends. - 4 wheel drive pulling unit driven by servomotors for high speed production; - Maximum pulling speed 140 m/minute; - The straightening system uses rotors, each one dedicated to a single bar diameter which guarantees perfectly straight bars and wire diameter changes in just a few seconds; - Servomotor driven cutting unit guarantees high speed and high cutting accuracy; - 2 bidirectional bending units work “off-line” so the bars are bent in “masked time”; - Automatic bending tooling changeover for higher productivity; - Indexing carriage for the automatic collection and sorting of the bars produced. -
Local Optimo is an important optimization software allowing to work on the machine’s computer. The software optimizes the cutting lengths by minimizing scraps. -
Manual bending line for the fabrication of bars bent on one or both ends. Composed of 2 bending units P45 or P60 and the bending bench MFC PRO with arms for automatic loading and unloading of the bars. -
Capacity: 6m³ of concrete -
Thanks to its innovating system, Mega Genius takes, counts and moves the bars for shear-line feeding in a completely automatic way. With Mega Genius you save money and enhance productivity due to its flexibility. Advantages:- ‘Mega Genius’ is extremely fast so it can feed more bars compared with manual feeding. The result is higher productivity per hour for any kind of shear line.
- No need of hard and dangerous bar handling so no need of people for such operation resulting in great money saving.
- The elimination of manual bar feeding enhances security at job site.
- “Mega Genius” special structure makes it possible to feed shear-lines with higher a number of bars of different diameter and length resulting in:
- drastic reduction in machine set-up;
- plant overall dimensions determined by clients’ room available;
- higher flexibility of the plant.
- The possibility to optimize cutting procedures means reducing scraps.
-
Mesh Spider is the lifting equipment to move electro-welded mesh panels which can hook mesh bundles from the outside. Due to its automatic hooking and releasing device Mesh Spider can move one or more mesh bundles in a fast and safe way resulting in room saving as the bundles can be stocked one next to the other. -
Mesh Spider is the lifting equipment to move electro-welded mesh panels which can hook mesh bundles from the outside. Due to its automatic hooking and releasing device Mesh Spider can move one or more mesh bundles in a fast and safe way resulting in room saving as the bundles can be stocked one next to the other. -
Mesh Spider is the lifting equipment to move electro-welded mesh panels which can hook mesh bundles from the outside. Due to its automatic hooking and releasing device Mesh Spider can move one or more mesh bundles in a fast and safe way resulting in room saving as the bundles can be stocked one next to the other. Thanks to its reduced dimensions, it can be used with both a crane or a forklift. Available version: MESH SPIDER 4-6 m INT: it is able to hook from the inside mesh bundles with 3 picking points. -
Mesh Spider is the lifting equipment to move electro-welded mesh panels which, thanks to its innovative patented hiding guns, can hook mesh bundles from the inside. Due to its automatic hooking and releasing device Mesh Spider can move one or more mesh bundles in a fast and safe way resulting in room saving as the bundles can be stocked one next to the other. -
Machine for the production of electro-welded meshes fed by wires. The automatic welding machine can manufacture electro-welded meshes from pre-straightened wire, both longitudinal and transversal. The mesh maximum width is equal to 1250 mm, the length is variable between 2000 mm and 6000 mm. -
Machine for the production of electro welded meshes supplied by bars and coils. This machine produces electro welded meshes with transversal wires pre-straightened and cut to size and longitudinal wires supplied directly from coils. The mesh maximum width is equal to 1250 mm and the length is unlimited. -
Integrated rod optimisation system for cutting and profiling machines. Designed for those who manufacture for civil housing and public works it allows cutting by diameter, cutting by element and cutting by position . It also allows optimising bar distribution into deposits and channels, minimizing waste, minimizing the cutting cycles (cutting time optimisation), minimizing diameter changes, distributing the production over the various cutting machines, etc. -
GENERAL FEATURES RPM per 1' 9 Power Kw 1,1 Weight Kg 250 Dimensions (LxLxH) 88x76x86 BENDING CAPACITY Bar No.bars No.bars No.bars No.bars No.bars 1 2 3 4 5 Res.650N/mm² Ø max 26 Ø max 18 Ø max 14 Ø max 12 Ø max 10 Res.850N/mm² Ø max 22 Ø max 16 Ø max 12 Ø max 10 Ø max 10 -
Bender for bar processing. Bending disk and adjustable strength steel saddles. - Capacity: 1 bar Ø 28mm - Plate revolving speed: 10 RPM -
GENERAL FEATURES RPM per 1' 8 Power Kw 1,5 Weight Kg 270 Dimensions (LxLxH) 88x76x86 BENDING CAPACITY Bar No.bars No.bars No.bars No.bars No.bars 1 2 3 4 5 Res.650N/mm² Ø max 32 Ø max 20 Ø max 16 Ø max 14 Ø max 12 Res.850N/mm² Ø max 24 Ø max 18 Ø max 14 Ø max 12 Ø max 10 -
Bender for bar processing. Bending disk and adjustable strength steel saddles. - Electronic programmer up to 9 bends - Capacity: 1 bar Ø 32mm - Plate revolving speed: 9 RPM -
Bender for bar processing. Bending disk and adjustable strength steel saddles. - Capacity: 1 bar Ø 36mm - Plate revolving speed: 8 RPM -
GENERAL FEATURES RPM per 1' 8 Power Kw 2,2 Weight Kg 390 Dimensions (LxLxH) 89x80x86 BENDING CAPACITY Bar No.bars No.bars No.bars No.bars No.bars 1 2 3 4 5 Res.650N/mm² Ø max 36 Ø max 26 Ø max 20 Ø max 16 Ø max 12 Res.850N/mm² Ø max 32 Ø max 22 Ø max 18 Ø max 14 Ø max 12 -
Two-speed dual-direction bender apt to process steel fed in bars. The double-column reduction gear prevents the rebars being stretched during bending operations. The equipment is driven by a self-braking motor. Electronic digital programmer mod. 'KS31'which allows programming stirrups and shapes with up to 30 bends, adjusting bending angles and storing up to 50 different shapes. Capacity: 1 bar Ø 36 mm. -
Bender for bar processing. Bending disk and adjustable strength steel saddles. - Capacity: 1 bar Ø 40mm - Plate revolving speed: 7-14 RPM -
GENERAL FEATURES RPM per 1' 7 Power Kw 3 Weight Kg 410 Dimensions (LxLxH) 89x80x86 BENDING CAPACITY Bar No.bars No.bars No.bars No.bars No.bars 1 2 3 4 5 Res.650N/mm² Ø max 40 Ø max 26 Ø max 22 Ø max 18 Ø max 14 Res.850N/mm² Ø max 36 Ø max 22 Ø max 18 Ø max 12 Ø max 10 -
Bender for bar processing. Bending disk and adjustable strength steel saddles. - Capacity: 1 bar Ø 45mm - Plate revolving speed: 5-12 RPM -
Two-speed dual-direction bender apt to process steel fed in bars. It doesn't pull the bars during bending operations. Capacity: 1 bar Ø 50 mm, Plate revolving speed 8 rpm -
GENERAL FEATURES RPM per 1' 10 Power Kw 1,5 Weight Kg 290 Dimensions (LxLxH) 46x81x86 BENDING CAPACITY AT 10 RPM PER 1' Bar No.bars No.bars No.bars No.bars No.bars 1 2 3 4 5 Res.650N/mm² Ø max 28 Ø max 20 Ø max 16 Ø max 14 Ø max 12 Res.850N/mm² Ø max 26 Ø max 18 Ø max 14 Ø max 12 Ø max 12 -
PF 36 N THREE-PHASE WITH SPEED VARIATORGENERAL FEATURES RPM per 1' 8 - 14 Power Kw 1,5 Weight Kg 290 BENDING CAPACITY AT 8 RPM PER 1' Bar No.bars No.bars No.bars No.bars No.bars 1 2 3 4 5 Res.650N/mm² Ø max 32 Ø max 20 Ø max 16 Ø max 12 Ø max 10 Res.850N/mm² Ø max 28 Ø max 16 Ø max 12 Ø max 10 Ø max 10
PF 36 N THREE-PHASE WITHOUT SPEED VARIATORBENDING CAPACITY 14 RPM PER 1' Bar No.bars No.bars No.bars No.bars No.bars 1 2 3 4 5 Res.650N/mm² Ø max 26 Ø max 18 Ø max 12 Ø max 10 Ø max 10 Res.850N/mm² Ø max 22 Ø max 14 Ø max 10 Ø max 8 Ø max 8 GENERAL FEATURES RPM per 1' 8 Power Kw 1,5 Weight Kg 290 BENDING CAPACITY Bar No.bars No.bars No.bars No.bars No.bars 1 2 3 4 5 Res.650N/mm² Ø max 32 Ø max 20 Ø max 16 Ø max 12 Ø max 10 Res.850N/mm² Ø max 28 Ø max 16 Ø max 12 Ø max 10 Ø max 10 -
GENERAL FEATURES RPM per 1' 8 Power Kw 2,2 Weight Kg 420 Dimensions (LxLxH) 127x76x86 BENDING CAPACITY AT 8 RPM PER 1' Bar No.bars No.bars No.bars No.bars No.bars 1 2 3 4 5 Res.650N/mm² Ø max 34 Ø max 27 Ø max 18 Ø max 14 Ø max 12 Res.850N/mm² Ø max 30 Ø max 20 Ø max 16 Ø max 12 Ø max 10 -
GENERAL FEATURES RPM per 1' 8 Power Kw 2,2 Weight Kg 380 Dimensions (LxLxH) 107x76x86 BENDING CAPACITY AT 8 RPM PER 1' Bar No.bars No.bars No.bars No.bars No.bars 1 2 3 4 5 Res.650N/mm² Ø max 34 Ø max 27 Ø max 18 Ø max 14 Ø max 12 Res.850N/mm² Ø max 30 Ø max 20 Ø max 16 Ø max 12 Ø max 10 -
GENERAL FEATURES RPM per 1' 8 Power Kw 2,2 Weight Kg 390 Dimensions (LxLxH) 80x89x86 BENDING CAPACITY AT 8 RPM PER 1' Bar No.bars No.bars No.bars No.bars No.bars 1 2 3 4 5 Res.650N/mm² Ø max 36 Ø max 26 Ø max 20 Ø max 16 Ø max 14 Res.850N/mm² Ø max 32 Ø max 22 Ø max 18 Ø max 14 Ø max 12 -
The bending machines 4S type are machines designed for a high production for professional workers in the bending field. Equipped with the recommended fittings, these machines will surprise you thanks to their high productivity and their easy usage.GENERAL FEATURES RPM per 1' 7 - 14 Power Kw 4 Weight Kg 780 Dimensions (LxLxH) 144x85x88 BENDING CAPACITY AT 7 RPM PER 1' Bar No.bars No.bars No.bars No.bars No.bars 1 2 3 4 5 Res.650N/mm² Ø max 38 Ø max 26 Ø max 22 Ø max 18 Ø max 16 Res.850N/mm² Ø max 32 Ø max 24 Ø max 20 Ø max 16 Ø max 14
