- Disassemble the clamp and soak all parts in heavy oil bath for 24 hours
- Then clean all components with compressed air
- Check the conditions of the knurl edge, replace wedges if necessary
- Re-assemble the wedge sets with the elastic ring
- Sprinkle graphite powder over wedges
- Check wedges and socket for equal taper
-
The re-usable open-type clamps are the most commonly used for the prestressing of traction cables as they are practical, cheap, easy to inspect and service. They are made from high quality steel and processed through severe heat treatment, which ensure many reuses and long life. CLAMPS SERVICING -
The Special Distributing machine with vertical lifting has been built in order to access areas where normal machines cannot do so. Such problematic areas include the casting of moulds for monoblocks or horizontal casting at a considerable height. Chief characteristics: Maximum casting height: 3,20 m Casting distance: 6m maximum with a belt rotating up to 90° -
Beams for construction of agricultural manufactures type 'BOOMERANG' Lenght: 12 - 18 - 20 -24 metres. -
Piston vibrators serie AC- Linear oscillations
- Large vibration amplitude
- Minimum air consumption
- Continuously adjustable
- Minimum lubrication
- Small sizes
-
Ball vibrators VK series- Fast start
- High frequencies
- Maintenance free
- Small sizes
- Minimum lubrication
-
Variable frequency vibrators series VFP/VFC are suitable for formwork or vibrating tables to produce concrete elements with high frequency vibrations optimized by an accurate speed regulation. This allows an optimal productivity of the plant and a remarkable lowering of the noise in relation to traditional systems. The VFP/VFC vibrators series can be equipped with 'auto displacing' weights, for differential vibration among the filling of the mould and the finishing of the produced element. THREE-PHASE INPUT VOLTAGE With standard execution at: - 2 Poles - 42V - 0-100 Hz – 0-6000 rpm - 4 Poles - 400V - 0-100 Hz – 0-6000 rpm FREQUENCY INVERTER Vibrators VFP/VFC series can be operated by any kind of inverter type PWM with constant torque. On specific request, Bianchi Casseforme may supply computerized vibration plant. -
Rotor vibrators serie VR- High centrifugal force
- High frequencies
- Void inertia
- Continuously adjustable
- Minimum lubrication
- Small sizes
-
Turbine vibrators VT series- Noise lower than 70 dB
- Very low air consumption
- Lubrication-free
- Wear resistant
- Small sizes
-
Synchronous alternative mouvement smoother for panels surface. Trolley for transformer. -
The “Reinforced Thermal Block” is a new brick composed of two sheets of vibro-pressed concrete separated by a shaped polystyrene core of variable thickness. The concrete sheets are connected by four connectors of galvanized steel of Ø 2-3 mm, which make the block a single body. -
To obtain perfect finishing, to achieve the highest strength in concrete, pneumatic vibration is the best solution. The range of application includes the pre-casting yard as well as the tunnelling yard, everywhere assuring the highest level of accident prevention, top reliability and no maintenance required. The pneumatic vibrator avoids the risk of resonance, by gearing its number of revolutions continuously.
