-
To fix quickly the side walls of your steel moulds. -
For closing the top of the moulds, we suggest our quick closing device by cam. -
Special sliding vibrators are available with pneumatic, hydraulic or mechanical locking device and pneumatic or electric vibrator. -
To reduce waste, the ideal solution for the recovery of long crop ends of strand is undoubtedly the coupler for plaits and strands. It consists of 2 clamps, whose diameter may vary, connected by a nipple. They are made from high quality steel and processed through severe heat treatment, which ensure many reuses and long life. COUPLERS SERVICING- Disassemble the clamp and soak all parts in heavy oil bath for 24 hours;
- Then clean all components with compressed air;
- Check the conditions of the knurl edge, replace wedges if necessary;
- Re-assemble the wedge sets with the elastic ring;
- Sprinkle graphite powder over wedges;
- Check wedges and socket for equal taper.
-
LIFTING CLUTCΗ is the re-usable component of the 'LIFTING SYSTEM', made of high resistance steel casting to guarantee lasting use. The lower end spheric part swings into the housing previously created into the concrete elements and its 'T' slot engages itself into the spheric head of the lifting anchor. The contact with the lifting anchor head is made during the lifting phase only when toe or spheric head is rested to the concrete element. -
Special compacting smoothing trowel for panels with aggregates in view. -
Prestressed long line casting bed for TT elements. Length: 36m - 65.5m - 72m - up to 120 m Shares of prestressing force: 250t - 350t - 500t - up to 800t Section with height from 300 to 1200 mm and width from 1200 to 2800mm Mould movement: manual or hydraulic Possibility to make moulds of the "slow" type, 'Self-reacting' type or with anchoring structure -
Height: variable; Tread: variable; Landing flight stair size: variable; Mould opening system: manual or hydraulic Vibration system: electric or pneumatic. -
Vibrating smoother for panels surface finishing -
For an accurate vibration of concrete even in special cases, whenever no vibration inside the formwork is possible, the solution is our sturdy pneumatic poker-type vibrator. Reliable, maintenance-free, totally safe. We propose our high-frequency, pneumatic vibrating pokers; they are bearing- and lubrication-free and consist of a wear-proof steel vibrating assembly, abrasion- and oil-proof rubber hose, silenced cock with air filter, 3/4” GAS connection. 6 Bar compressed air required. -
Main standard technical specifications:- Panel dimensions allowed: Thickness: any - Height: 3200mm divisible, (upon request over 3200mm) - Length: any;
- Adjustable traverse speed: usually 2.5 - 6m/min.;
- Electric feed: 400V, 50Hz;
- Electric Power allowed: 48-70-92 kW;
- Water network feed: 90/180/270 l/min., pressure 1.5 bar;
- Water pressure during washing operation: adjustable 60-120 bar;
- Pump: piston type per 120 bar max., flow rate: 110 l/min.;
- Brushes with vertical motion: n. 02x3500mm;
- Support of trolleys: traverse on rails.
