-
The stairs element is constituted by a suitably shaped polystyrene core, wherein the rise and tread may vary according to the needs of the project. This element must be reinforced and completed on site. -
This panel is used for the construction of floors and roofs. The thickness and geometry of the panel can be varied according to the span and project requirements. The placement of the reinforcement and the concrete pour can be made totally on site or partially in the production plant. -
Pin for steel plate locking suitable for 20 mm diameter holes. Use together with wedge L=100-200 mm. Locking wedge, 100 mm long, to be used together with pins. -
To neutralize the effect of strands where a minor compression stress is required, the best solution to avoid operating difficulties of deviated strands is the soft sheath for the strand neutralization. Easy to apply, available for various sizes of strand and plaits, antioxidizing. Packs: • Yellow colour soft sheath for 0.6'' strand only, supplied into 3m long packs of 300m in total. • Red colour sheat idoneous for 3/8'',1/2'',0.6'' strands, supplied into 3m long packs of 600m in total • Sheat for 3x3 plait, supplied into 3m long packs of 1500m in total. -
Prestressed universal long line casting bed. Length: 36m up to 120 - 200m Shares of prestressing force: 300t - 500t - 800t - 1200t - 1600t up to 3600t Base width from 300 to 2500mm Mould movement: manual or hydraulic Possibility to make moulds of the 'slow' type, 'Self-reacting' type or with anchoring structure -
Main standard technical specifications:- Panel dimensions allowed: Thickness: any - Height: 3200mm divisible, (upon request over 3200mm) - Length: any;
- Adjustable traverse speed: usually 2.5 - 6m/min.;
- Electric feed: 400V, 50Hz;
- Electric Power allowed: 48-70-92 kW;
- Water network feed: 90/180/270 l/min., pressure 1.5 bar;
- Water pressure during washing operation: adjustable 60-120 bar;
- Pump: piston type per 120 bar max., flow rate: 110 l/min.;
- Brushes with vertical motion: n. 02x3500mm;
- Support of trolleys: traverse on rails.
-
For an accurate vibration of concrete even in special cases, whenever no vibration inside the formwork is possible, the solution is our sturdy pneumatic poker-type vibrator. Reliable, maintenance-free, totally safe. We propose our high-frequency, pneumatic vibrating pokers; they are bearing- and lubrication-free and consist of a wear-proof steel vibrating assembly, abrasion- and oil-proof rubber hose, silenced cock with air filter, 3/4” GAS connection. 6 Bar compressed air required. -
Vibrating smoother for panels surface finishing -
Height: variable; Tread: variable; Landing flight stair size: variable; Mould opening system: manual or hydraulic Vibration system: electric or pneumatic. -
Prestressed long line casting bed for TT elements. Length: 36m - 65.5m - 72m - up to 120 m Shares of prestressing force: 250t - 350t - 500t - up to 800t Section with height from 300 to 1200 mm and width from 1200 to 2800mm Mould movement: manual or hydraulic Possibility to make moulds of the "slow" type, 'Self-reacting' type or with anchoring structure -
Special compacting smoothing trowel for panels with aggregates in view.
