-
This panel consists of a sheet of polystyrene sandwiched between two mats of welded wire mesh. The polystyrene sheet can be shaped as required and the thickness can vary according to needs. The Single Panel can be used for the construction of single and multistory buildings according to the local building regulations. -
This panel consists of two single panels joined together with an intermediate cavity. The thickness of the polystyrene and the width of the cavity can be varied according to the performance required. The external faces of the panel are usually finished in plaster. -
These are single panels that are integrated with traditional reinforced concrete structures as the external wall cladding, partition walls and floors. The advantages are the speed of application and the excellent insulation properties. By varying the thickness of the panel it is possible to reach a classification of the construction of Category A. -
The “Reinforced Thermal Block” is a new brick composed of two sheets of vibro-pressed concrete separated by a shaped polystyrene core of variable thickness. The concrete sheets are connected by four connectors of galvanized steel of Ø 2-3 mm, which make the block a single body. -
Machine to cut the polystyrene blocks in sheets used for the production of the systems’ components. The machine allows to cut vertically and horizontally the blocks and to obtain sheets of different thicknesses. -
Automatic mesh bending machine, equipped with double gearmotor, fast fitting pins. -
Stirrup bender and bar shaping machine from coil with 2 bending heads for the production of stirrups and shaped wires with bends at both ends using wires up to Ø 20 mm (#6). Driven by electric servomotors. - Max. pulling speed: 140 m/min (460 ft/min) - Straighteners (horizontal-vertical) with electronic and independent setting for the 2 wires with Joystick - Anti-Twist electronic device (Optional) - Patented feed unit that allows independent advancement for single o double wire (Optional) - 2 bending unit (upper and lower) - Pulling with 4 motors and 4 pulling drive wheels - Cutting unit with adjustable wire guide, reversible mobile and fixed cutting blades - Web Teleassistance - Pre-straightening Feeding Unit (Optional) - Automatic motorized wire change (Optional) 3D version for the production of tri-dimensional pieces. The 'bridge' version (Eura 20 Bridge) is suitable for accepting an optional mobile carriage which allows collecting and classifying the manufactured stirrups and rebars. -
Stirrup bender and bar shaping machine from coil with 2 bending heads for the production of stirrups and shaped wires with bends at both ends using wires up to Ø 16 mm (#5). Driven by electric servomotors. Also available HS version machine. - Max. pulling speed: 140 m/min (460 ft/min) - HS Version: 200 m/min (660 ft/min) - Straighteners (horizontal-vertical) with electronic and independent setting for the 2 wires with Joystick - Anti-Twist electronic device (Optional) - Patented feed unit that allows independent advancement for single o double wire (Optional) - 2 bending unit (upper and lower) - 4 pulling drive wheels - Cutting unit with adjustable wire guide, reversible mobile and fixed cutting blades - Web Teleassistance 3D version for the production of tri-dimensional pieces. The 'bridge' version (Eura 16 Bridge) is suitable for accepting an optional mobile carriage which allows collecting and classifying the manufactured stirrups and rebars. -
Bi-directional automatic bar shaping machine from bar, with 2 bending heads, allows to produce shaped wires and cut-to-size bars using wires up to Ø 28 mm (#8). Driven by digital electric servomotors. - Max. pulling speed: 180 m/min (600 ft/min) - 2 bending units (upper and lower) - Clamp for extraction of the end part of the bar - Virtual mandrel - Web Teleassistance - Automatic loader Genius (Optional) Bar Wiser 28 Pack 0: Storage rack pneumatically operated. Bar Wiser 28 Pack 1: Motorized carriage, allows automatic classification of the bars and shaped wires. Bar Wiser 28 Pack 2: Chain collecting and unloading carriage, characterised by chain feeders and storage racks. -
Bi-directional automatic stirrup bender, allows to to produce stirrups and shaped wires both from bars (up to Ø 22 mm - #7) and from coils (up to Ø 16 mm - #5). The lower bending unit performs downward bends. Driven by electric servomotors. - Max. pulling speed: 100 m/min (330 ft/min) - External and internal straightening unit - Semi-automatic cycle for shaped wires with bends on both ends - Bar-holding clamp for downward bends - Virtual mandrel for the upper processing unit - Web Teleassistance -
Bi-directional stirrup bender and bar shaping machine from bar, allows to produce stirrups, shaped wires and cut-to-size bars using bars up to Ø 22 mm (#7). Driven by electric servomotors. - Max. pulling speed: 120 m/min (400 ft/min) - Semi-automatic cycle for shaped wires with bends on both ends - Virtual mandrel - Web Teleassistance - Automatic loader Genius (Optional) 3D version for the production of tri-dimensional pieces. -
Automatic bending robot for the production of shapes with positive bends (“L”, “C” and double “C”), up to Ø 40 mm (#11). Device for the production of "bottlenecks“. - Automatic system for bars feeding and discharging.
